How Hot Is Too Hot to Work Outside in Australia? What the Law Says


Ask ten business owners at what temperature outdoor work should stop and you will get ten different answers. 35 degrees. 38. 40. Some will say "when it feels too hot".
The honest answer is that there isn't a number.
Australian WHS laws do not set a maximum temperature for work, and no single "stop work" temperature applies across the country.
That does not mean you are off the hook. If fact it means the opposite, in that the decision sits with you. This guide covers what the laws do say, why a single number would not work anyway, and how to decide your own heat plan before the day gets hot, not after.
What the law says about working in heat
Under the model WHS laws, a business has to eliminate risks to workers' health and safety so far as is reasonably practicable. If it cannot eliminate a risk, it has to minimise it so far as is reasonably practicable. Heat is one of those risks.
Safe Work Australia's guidance says that may include cancelling or rescheduling certain tasks until conditions are cooler. Queensland's regulator says there is no workplace exposure standard or limit for heat stress, and that setting a limit on air temperature alone is not appropriate.
"Reasonably practicable" is a judgement call. You need to be able to show how you made it.
Why a single number would not work
Air temperature is only part of the picture. The same 34 degree day can be fine for one job and dangerous for another.
Things that change the risk include:
Humidity. Sweat does not cool you down as well when the air is already damp.
Radiant heat. Working in direct sun, on a roof, or next to hot machinery adds heat that the forecast does not show.
Physical effort and how long it goes for. Digging for six hours is not the same as inspecting a site for twenty minutes.
Clothing and PPE. Heavy protective gear can trap heat close to the body.
Airflow. A confined space or a hot shed with no breeze is harder than an open paddock.
The person. Age, fitness, medications, health conditions, and being new to the job or back after time away all change how someone handles heat.
Heatwaves. Several hot days in a row add up.
A number that suits a landscaper on a cool morning is wrong for a roofer at 2pm. That is why the law leaves it to the business to assess the risk for its own work.

Decide your line in the sand before the day gets hot
This is the part most businesses skip, and it is the part that makes the difference.
If you decide whether it is too hot while you are standing in the heat, with a job to finish and a client waiting, the call is usually made by the schedule. It is much easier, and fairer for everyone, to decide in advance.
Sit down with your team and agree your own triggers. For example, your plan might
say:
Heavy physical work starts at 5:30am once the forecast reaches a level you choose.
Above a certain reading, heavy tasks stop at a set time and lighter work takes over.
On a heatwave day, you review the plan and run extra breaks.
Anyone can call a break if they feel unwell, without having to justify it.
Those are examples, not rules. The numbers should come from your own work, your sites and your people. What matters is that they are agreed, written down and known by everyone before the first hot day, so the decision on the day is already made.
Safe Work Australia's guidance also asks you to consult your workers and health and safety representatives on heat controls. Asking your team what they find hard on a hot day is one of the quickest ways to find the gaps in your plan.
What helps on the ground
None of this needs to be complicated.
Plan the day around the heat. Move heavy physical work to the cooler part of the day where you can, and keep the lighter tasks for the afternoon. Heat stress is still possible on cooler days, so keep watching.
Make water and shade easy to reach. Workers should have access to cool drinking water, and somewhere shaded or cool to take a break. If people have to walk a long way for a drink, they skip it. Sipping small amounts often works better than drinking a lot at once.
Think about clothing. Loose, lightweight, breathable clothing helps. Where PPE is heavy, build in more breaks.
Keep sun gear on hand. A few spare hats and sunscreen in the ute make it easy for everyone to cover up without thinking about it.
Be careful with new starters. Anyone new, or back after a week or more away, is at higher risk. Safe Work Australia says not to rely on acclimatisation as a control by itself, so build it into your plan alongside shorter exposure and more breaks, not instead of them.
Look out for each other. Where possible, workers should not work alone in the heat. A buddy system means someone notices when a mate goes quiet.
Know the warning signs
A quick chat at the start of the day means everyone knows what to look out for.
Signs of heat illness include dizziness, heavy sweating, visual disturbances, nausea, muscle cramps and fainting. Heat stroke is a medical emergency. Signs include a very high body temperature (above 39 degrees) and the person stopping sweating. Call 000 straight away and start cooling the person while you wait.
Your emergency plan should cover heat illness, so people know what to do before they need to.
The common mix-up: "Isn't there a legal limit somewhere?"
You may hear that work has to stop at a certain temperature, or that workers can walk off the job at 38 degrees. In the Australian WHS laws and regulators' guidance we checked, there is no such number.
What there is, is your duty to manage the risk, and a worker's right to raise a safety concern or stop work they believe is unsafe. Different industries also sometimes have their own agreements or rules that set heat triggers, so check whether anything of that kind applies to your workplace. If it does, your own plan should reflect it.
A short heat plan checklist
Think through which jobs in your business carry the most heat risk, and when.
Agree your own triggers with your team and write them down.
Plan heavy work for the cooler part of the day where you can.
Put cool water and shade within easy reach of every job.
Brief new starters and anyone returning from leave.
Make sure people know the warning signs and who to call.
Review the plan after the first hot spell, and update it.
Put it in writing
A heat plan only works if everyone can find it. Your WHS manual is the natural home for it: who decides when work changes, what the triggers are, how workers raise a concern, and what to do in an emergency.
Our WHS Management Systems give you the manual, procedures and forms, ready to edit for your business.
You can also run the free heat, sun and skin protection toolbox talks with your team before the next hot spell: Download the free toolbox talks
General guidance only, not legal advice. Check the requirements for your state or territory with your regulator.








Comments