This Equipment Installation Risk Assessment/JSA (Job Safety Analysis) is pre-filled and covers delivering, lifting, fixing and installing equipment, including overhead work and drilling into concrete and masonry. It covers 15 activities, from the site induction to post-work handover and emergency response, with the hazards, control measures and risk ratings before and after controls for each. It's written by WHS specialists, aligned to Australian WHS legislation, and fully editable in Microsoft Word.
Who it's for
Mechanical and air conditioning installers
Facilities maintenance contractors
Commercial kitchen and equipment installers
Shopfitters and fit-out contractors
Audio visual and signage installers
A risk assessment, also called a JSA, JSEA or task risk assessment, records the hazards of a task and how you control them. If the task is part of high risk construction work, the law requires a SWMS for that work, so use our Equipment Installation SWMS instead.
Use it to
Show clients, insurers and auditors how you manage the risks
Apply for tenders, contracts and supplier panels
Get through prequalification with Avetta, Cm3 and other contractor portals
Induct new workers and train them in the task
What this risk assessment covers
Hazard information and site induction before starting
Planning the work area, including poor access and lighting
Delivering materials and equipment, with manual handling and pedestrian safety
Lifting and moving equipment, including crushed fingers and feet and working near other trades
Drilling with cordless and rotary hammer drills, including eye damage and dust
Installing fixings, including battery actuated fastening tools and falling objects
Silica dust from cutting, grinding, drilling or chasing concrete, masonry and tile
Portable electrical equipment and leads, especially in wet or outdoor conditions
Working at height from ladders, platforms and EWPs, plus dropped tools and fixings
Clean-up, housekeeping and waste handling
Post-work inspection to prevent unsafe fixings or unauthorised re-energisation
Emergency response to an electrical fault, fire, fall or injury
What's included
Hazards and control measures for 15 work activities
Risk ratings before and after controls, with a 5x5 risk matrix and the hierarchy of controls
PPE requirements checklist
Plant list, including duct lifters, trolleys and pallet jacks, with daily pre-start checks
Training requirements, including the General Construction Induction Card and site specific induction
Site specific hazards section for anything unique to your job
Further controls action plan to track anything still to be done
Worker sign-off sheet and worker consultation record
Why use this template
Saves hours compared with writing a risk assessment from a blank page
Covers the most common hazards and control measures for this work, ready to use out of the box
Fully editable, so you can add, remove or change anything to suit your workplace and how your team works
Helps your business stay compliant, with risk ratings, an action plan, worker sign-off and consultation records already set up
Comes with a step-by-step implementation guide
How it works
Buy online and download straight away. You'll also get an email with your link.
Add your logo, ABN, area and site details.
Check it suits your workplace and task, edit anything you need to, and consult your workers before you finalise it.
Brief your team and collect signatures.
Common questions
Do I need a SWMS or a risk assessment for equipment installation?
A SWMS is legally required when the installation is high risk construction work, for example fixing equipment where someone could fall more than 2 metres, or moving equipment where powered mobile plant is operating. Outside those situations it isn't mandatory, but you still have to manage the risks, and a risk assessment or JSA is a practical way to record how. Head contractors and facility managers often ask for one either way. If the job is high risk construction work, use our Equipment Installation SWMS instead.
Does it cover overhead installation work?
Yes. It covers working at height to install equipment, including falls from ladders, platforms and EWPs, and dropped tools and fixings striking someone below.
Can I change it?
Yes. It's a Microsoft Word file, so you can add, remove or change any hazard, control or rating, and add your own logo and details.
Does it suit my state?
Yes. It's written to the model WHS laws and suits all states and territories, including Victoria under the OHS Act and Regulations.
What if it doesn't suit my work?
You're covered by our 30-day money-back guarantee if it isn't fit for purpose.
