This Tractor Operation Risk Assessment/JSA (Job Safety Analysis) is pre-filled and covers operating agricultural tractors with three-point linkage, PTO-driven implements, front-end loaders and trailers. It sets out 34 activities, from the daily pre-start inspection to shutdown, parking and emergency response, with the hazards, control measures and risk ratings before and after controls for each. It's written by WHS specialists, aligned to Australian WHS legislation, and fully editable in Microsoft Word.
 
Who it's for
Farmers, graziers and agricultural businesses
Agricultural contractors doing slashing, mulching and cultivation
Vineyards, orchards and market gardens
Grounds and property maintenance crews using tractors
Turf farms, nurseries and rural landholders
A risk assessment, also called a JSA, JSEA or task risk assessment, records the hazards of a task and how you control them. If the task is part of high risk construction work, the law requires a SWMS for that work, so use our Tractor Operation SWMS instead.
 
Use it to
Show clients, insurers and auditors how you manage the risks
Apply for tenders, contracts and supplier panels
Get through prequalification with Avetta, Cm3 and other contractor portals
Induct new workers and train them in the task
 
What this risk assessment covers
Operator competency, authorisation and route checks for holes, stumps, soft ground and banks
Daily pre-start inspection, including ROPS and seat belt checks
Mounting, starting and the run-over risk from bypass starting
Attaching three-point linkage implements and connecting PTO drivelines with guarding
Hitching and towing, including rear rollover from hitching too high
Side rollover on slopes, and working near dams, channels and banks
Front-end loader work, including raised loads, rolling bales and people lifted in a bucket
Slashers, mulchers, post hole diggers and striking buried services
Clearing blockages, and working near people, livestock and overhead powerlines
Public road travel and GPS guidance or auto-steer
Noise, vibration, dust, heat, snakes, refuelling, servicing and tyre work
Machine fires, working alone, shutdown and emergency response to rollover or entanglement
 
What's included
Hazards and control measures for 34 work activities
Risk ratings before and after controls, with a 5x5 risk matrix and the hierarchy of controls
PPE requirements checklist
Plant and equipment list, materials, daily pre-start checks and servicing records
Relevant Australian Standards, including AS 1636 for tractor rollover protective structures and AS/NZS 4024 for machinery safety
Operator competency on each tractor and attachment, with AHCMOM202 Operate tractors where required
Site specific hazards section for anything unique to your job
Further controls action plan to track anything still to be done
Worker sign-off sheet and worker consultation record
 
Why use this template
Saves hours compared with writing a risk assessment from a blank page
Covers the most common hazards and control measures for this work, ready to use out of the box
Fully editable, so you can add, remove or change anything to suit your workplace and how your team works
Helps your business stay compliant, with risk ratings, an action plan, worker sign-off and consultation records already set up
Comes with a step-by-step implementation guide
 
How it works
Buy online and download straight away. You'll also get an email with your link.
Add your logo, ABN, area and site details.
Check it suits your workplace and task, edit anything you need to, and consult your workers before you finalise it.
Brief your team and collect signatures.
 
Common questions
Do I need a SWMS or a risk assessment for tractor operation?
Only if the work is high risk construction work, for example a tractor used on a construction project next to a road in use, or near energised overhead powerlines. Normal farm and paddock work isn't construction, so a SWMS isn't a legal requirement there. You still have to manage risks like rollover and PTO entanglement, and a risk assessment or JSA is a practical way to record how. Clients and prequalification portals often ask for one. If the job is high risk construction work, use our Tractor Operation SWMS instead.
Does it cover PTO guarding and entanglement?
Yes. It covers connecting and operating the PTO driveline, missing or damaged PTO guarding, PTO-driven implements like slashers and post hole diggers, and clearing blockages without the machine restarting or stored energy releasing.
Can I change it?
Yes. It's a Microsoft Word file, so you can add, remove or change any hazard, control or rating, and add your own logo and details.
Does it suit my state?
Yes. It's written to the model WHS laws and suits all states and territories, including Victoria under the OHS Act and Regulations.
What if it doesn't suit my work?
You're covered by our 30-day money-back guarantee if it isn't fit for purpose.