This Fire Rating of Services Risk Assessment/JSA (Job Safety Analysis) is pre-filled and covers installing passive fire protection around service penetrations, such as fire pillows, mastic, fire board and FR batts. It covers 17 activities, from starting on a new site to selecting the correct tested fire stopping system, with the hazards, control measures and risk ratings before and after controls for each. It's written by WHS specialists, aligned to Australian WHS legislation, and fully editable in Microsoft Word.
Who it's for
Passive fire protection contractors
Fire stopping and penetration sealing installers
Electricians, plumbers and mechanical trades sealing their own penetrations
Fire services maintenance businesses
Builders and fit-out contractors managing fire rated construction
A risk assessment, also called a JSA, JSEA or task risk assessment, records the hazards of a task and how you control them. If the task is part of high risk construction work, the law requires a SWMS for that work, so use our Fire Rating of Services SWMS instead.
Use it to
Show clients, insurers and auditors how you manage the risks
Apply for tenders, contracts and supplier panels
Get through prequalification with Avetta, Cm3 and other contractor portals
Induct new workers and train them in the task
What this risk assessment covers
Starting on a new site, including induction, emergencies and unassessed hazards
Setting up and clearing the work area, including moving plant, lighting and trip hazards
Coordinating with other trades working in the same area
Taking delivery of materials and moving them to the work area
Installing from platform ladders and EWPs, including falls and falling objects
Working in risers, including falls through penetrations
Chemical exposure from mastic
Power tool use, including noise, cuts, entanglement, overheating and electrocution
Live electrical services in slabs and around penetrations
Isolating and reinstating fire detection and suppression, and avoiding unwanted alarms
Selecting the correct tested system for each penetration, plus post-work inspection and sign-off
Clean-up, waste disposal and emergency response
What's included
Hazards and control measures for 17 work activities
Risk ratings before and after controls, with a 5x5 risk matrix and the hierarchy of controls
PPE requirements checklist
Plant list, including scissor lifts, power tools, leads and task lighting, with daily pre-start checks
Qualifications, including construction induction, working at heights and EWP training
Site specific hazards section for anything unique to your job
Further controls action plan to track anything still to be done
Worker sign-off sheet and worker consultation record
Why use this template
Saves hours compared with writing a risk assessment from a blank page
Covers the most common hazards and control measures for this work, ready to use out of the box
Fully editable, so you can add, remove or change anything to suit your workplace and how your team works
Helps your business stay compliant, with risk ratings, an action plan, worker sign-off and consultation records already set up
Comes with a step-by-step implementation guide
How it works
Buy online and download straight away. You'll also get an email with your link.
Add your logo, ABN, area and site details.
Check it suits your workplace and task, edit anything you need to, and consult your workers before you finalise it.
Brief your team and collect signatures.
Common questions
Do I need a SWMS or a risk assessment for fire rating of services?
A SWMS is legally required when the work is high risk construction work, for example where someone could fall more than 2 metres from an EWP or into a riser, or near energised electrical services. Outside those situations it isn't mandatory, but you still have to manage the risks, and a risk assessment or JSA is a practical way to record how. Builders and prequalification portals often ask for one either way. If the job is high risk construction work, use our Fire Rating of Services SWMS instead.
Does it cover fire system isolations?
Yes. It covers isolating and reinstating fire detection and suppression, including the risk of systems left isolated after the work and unwanted alarms from dust or hot work.
Can I change it?
Yes. It's a Microsoft Word file, so you can add, remove or change any hazard, control or rating, and add your own logo and details.
Does it suit my state?
Yes. It's written to the model WHS laws and suits all states and territories, including Victoria under the OHS Act and Regulations.
What if it doesn't suit my work?
You're covered by our 30-day money-back guarantee if it isn't fit for purpose.
