This Air Conditioner Installation Risk Assessment/JSA (Job Safety Analysis) is pre-filled and covers installing air conditioning units, from preparing the work area to charging the system with refrigerant and starting the unit. It sets out 18 activities, from site induction and PPE to completing the work and incident response, with the hazards, control measures and risk ratings before and after controls for each. It's written by WHS specialists, aligned to Australian WHS legislation, and fully editable in Microsoft Word.
Who it's for
Air conditioning installers and refrigeration mechanics
HVAC contractors on residential and commercial jobs
Electricians who install split systems
Builders coordinating air conditioning installs
Facilities maintenance contractors
A risk assessment, also called a JSA, JSEA or task risk assessment, records the hazards of a task and how you control them. If the task is part of high risk construction work, the law requires a SWMS for that work, so use our Air Conditioner Installs SWMS instead.
Use it to
Show clients, insurers and auditors how you manage the risks
Apply for tenders, contracts and supplier panels
Get through prequalification with Avetta, Cm3 and other contractor portals
Induct new workers and train them in the task
What this risk assessment covers
Site induction, hazard awareness and working alone
PPE, housekeeping and moving on stairs and slippery surfaces
Working at heights, including falls and falling objects
Confined and restricted spaces, with heat, dust, low ceilings and awkward postures
Working in hot conditions, including heatstroke and dehydration
Planning the work area around the public, electrical hazards and hazardous substances
Oxy-acetylene welding and hot work in flammable atmospheres
Angle grinder use and inspecting electrical test equipment
Installing the unit, including supports, manual handling and rotating parts
Charging with refrigerant gas, including asphyxiation, gas burns and cylinder handling
Inspecting and starting the unit, and portable electrical equipment and leads
Completing the job and responding to incidents or injuries
What's included
Hazards and control measures for 18 work activities
Risk ratings before and after controls, with a 5x5 risk matrix and the hierarchy of controls
PPE requirements checklist
Plant and equipment list, including EWPs, ladders, oxy-acetylene and refrigeration tools
Maintenance checks to manufacturer's instructions and AS/NZS 3760 for electrical equipment
Qualifications including the refrigerant handling licence, electrical licensing and hot work training
Site specific hazards section for anything unique to your job
Further controls action plan to track anything still to be done
Worker sign-off sheet and worker consultation record
Why use this template
Saves hours compared with writing a risk assessment from a blank page
Covers the most common hazards and control measures for this work, ready to use out of the box
Fully editable, so you can add, remove or change anything to suit your workplace and how your team works
Helps your business stay compliant, with risk ratings, an action plan, worker sign-off and consultation records already set up
Comes with a step-by-step implementation guide
How it works
Buy online and download straight away. You'll also get an email with your link.
Add your logo, ABN, area and site details.
Check it suits your workplace and task, edit anything you need to, and consult your workers before you finalise it.
Brief your team and collect signatures.
Common questions
Do I need a SWMS or a risk assessment for air conditioner installation?
A SWMS is legally required when the job is high risk construction work, for example installing units where someone could fall more than 2 metres, working on or near refrigerant lines, or working near energised electrical installations. Outside those situations a SWMS isn't mandatory, but you still have to manage the risks, and a risk assessment or JSA is a practical way to record how. Builders, head contractors and prequalification portals often ask for one either way. If the job is high risk construction work, use our Air Conditioner Installs SWMS instead.
Does it include refrigerant licence requirements?
Yes. It lists a refrigerant handling licence of the correct class for anyone charging, recovering or handling a regulated refrigerant, and a refrigerant trading authorisation held by the business.
Can I change it?
Yes. It's a Microsoft Word file, so you can add, remove or change any hazard, control or rating, and add your own logo and details.
Does it suit my state?
Yes. It's written to the model WHS laws and suits all states and territories, including Victoria under the OHS Act and Regulations.
What if it doesn't suit my work?
You're covered by our 30-day money-back guarantee if it isn't fit for purpose.
