This Jackhammer Risk Assessment/JSA (Job Safety Analysis) is pre-filled for breaking concrete, masonry and other hard materials with an electric or pneumatic jackhammer. It covers 14 activities, from surveying the work area and marking cut lines to emergency response, with the hazards, control measures and risk ratings before and after controls for each. It's written by WHS specialists, aligned to Australian WHS legislation, and fully editable in Microsoft Word.
 
Who it's for
Concreters and concrete cutting contractors
Demolition and strip-out contractors
Plumbers and drainers breaking slabs
Civil and landscaping crews
Builders and renovators doing alterations
It also works as a written task risk assessment for any business where workers use a jackhammer, the same way you'd use a JSA or Safe Work Procedure.
A risk assessment, also called a JSA, JSEA or task risk assessment, records the hazards of a task and how you control them. If the task is part of high risk construction work, the law requires a SWMS for that work, so use our Jackhammer SWMS instead.
 
Use it to
Show clients, insurers and auditors how you manage the risks
Apply for tenders, contracts and supplier panels
Get through prequalification with Avetta, Cm3 and other contractor portals
Induct new workers and train them in the task
 
What this risk assessment covers
Site induction and information on new or changing site hazards
Surveying the work area, marking cut lines and securing entry and exit
Setting up tools and hired plant, with manual handling, slips and trips
PPE selection and use
Housekeeping to clear obstacles and cluttered work areas
Noise exposure and hearing damage
Electrical safety, including RCDs and tested leads
Hand arm vibration and white finger, with anti-vibration handles
Using the jackhammer, including dust, bit injuries to hands and feet, and back strain
Dust, slurry, noise and waste control, plus post-work checks for hot bits and debris
Emergency response to electrical faults, fire, crush injuries or silica exposure
 
What's included
Hazards and control measures for 14 work activities
Risk ratings before and after controls, with a 5x5 risk matrix and the hierarchy of controls
PPE requirements checklist
Plant and equipment list, including RCDs, H class vacuum or water suppression, lifting aids, signs and barricades
Maintenance checks for respiratory protective equipment and the on-tool dust suppression or extraction system
Site specific hazards section for anything unique to your job
Further controls action plan to track anything still to be done
Worker sign-off sheet and worker consultation record
 
Why use this template
Saves hours compared with writing a risk assessment from a blank page
Covers the most common hazards and control measures for this work, ready to use out of the box
Fully editable, so you can add, remove or change anything to suit your workplace and how your team works
Helps your business stay compliant, with risk ratings, an action plan, worker sign-off and consultation records already set up
Comes with a step-by-step implementation guide
 
How it works
Buy online and download straight away. You'll also get an email with your link.
Add your logo, ABN, area and site details.
Check it suits your workplace and task, edit anything you need to, and consult your workers before you finalise it.
Brief your team and collect signatures.
 
Common questions
Do I need a SWMS or a risk assessment for jackhammer work?
A SWMS is legally required when the job is high risk construction work, for example breaking up a load-bearing element, work likely to disturb asbestos, or work where powered mobile plant is moving. Outside those situations a SWMS isn't mandatory, but you still have to manage the risks, and a risk assessment or JSA is a practical way to record how. Clients, head contractors and prequalification portals often ask for one either way. If the job is high risk construction work, use our Jackhammer SWMS instead.
Does it cover silica dust?
Yes. It covers dust from breaking concrete and masonry, with water suppression or an H class vacuum, respiratory protection, and emergency response to silica exposure.
Can I change it?
Yes. It's a Microsoft Word file, so you can add, remove or change any hazard, control or rating, and add your own logo and details.
Does it suit my state?
Yes. It's written to the model WHS laws and suits all states and territories, including Victoria under the OHS Act and Regulations.
What if it doesn't suit my work?
You're covered by our 30-day money-back guarantee if it isn't fit for purpose.